AT5659资料

• 1 CH(Forward-reverse) control DC motor driver• 4 CH BTL(Balanced Transformerless) driver• Built-in Thermal shutdown circuit

• Built-in 5V regulator (with an external PNP TR)• Built-in mute circuit

• Built-in Tray motor speed control circuit

• Wide operating supply voltage range: 6V~13.2V

The AT5659 is a monolithic integrated circuit, andsuitable for 5-ch motor driver which drives focusactuator,tracking actuator, sled motor, spindlemotor and Tray motor of CDP & VCD system.

Applications

• CD-PLAYER• VIDEO-CD• CAR-CD

Block Diagram

Aimtron reserves the right without notice to change this circuitry and

specifications.

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw1

AT5659 Preliminary Product Information 5-Ch Motor Driver for CD/VCD Player Pin Configuration

Ordering Information

Part numberAT5659H

Package28-pin HSOP

MarkingAT5659H

Pin Description

Pin No.

Symbol

Descript

Pin No

Symbol

Descript

1234567891011121314

DO1.1CH1output (-)DO1.2CH1 output (+)DI1.1DI1.2REBREO

CH1 input 1

CH1 input 2 (Adjustable)Regulator baseRegulator output, 5V

1516171819202122232425262728

DO5.1CH5 output (+)DO5.2CH5 output (-)DO3.1CH3 output (-)DO3.2CH3 output (+)DI3CTLVCC1VCC2DI4.1DI4.2

CH3 inputCH5 motor speed controlSupply voltage 1Supply Voltage 2CH4 input 1 (Adjustable)CH4 input 2

MUTEMuteGND1Ground 1DI5.1DI2

CH5 input 1CH2 input

VREFCH bias input

DO2.1CH2 output (+)DO2.2CH2 output (-)GND2Ground 2DI5.2

CH5 input 2

DO4.1CH4 output (+)DO4.2CH4 output (-)GND3Ground 3

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw2

AT5659 Preliminary Product Information 5-Ch Motor Driver for CD/VCD Player Absolute Maximum Ratings

(Ta=+250C

)

Parameter

Maximum supply voltagePower dissipationOperating temperatureStorage temperatureMaximum current output

NOTE:*

SymbolVCCMAX

PDTOPRTSTGIOMAXLimits13.5*1.7-25~+75-55~+150

1

UnitVW℃℃A

1.When mounted on 76mm× 114mm×1.57mm PCB (Phenolic resin material).2. Power dissipation reduces 13.6mW / °C for using above Ta=25°C3. Do not exceed Pd and SOA.

Recommended Operating Conditions

(Ta=+250C)

Parameter

Operatong supply voltage

SymbolVcc

Min.5.5

ValuesTyp.--Max.13.2

UnitV

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw3

AT5659 Preliminary Product Information 5-Ch Motor Driver for CD/VCD Player Electrical Characteristics

(unless otherwise noted, Ta=25℃, Vcc1=Vcc2=8V, RL=8Ω, and f=1kHz )

ParameterSymbolConditionUnder no-loadPin 7=GND

----IL=100mAIL=0~200mA

VCC=6~13V, IL=100mA

----RL=8Ω→VCCRL=8Ω→GNDVIN=0.7VVIN=7VVIN=0.1VRMS

VIN=0.1VRMS, f=120Hz120Hz, VIN=1VRMS,Square wave

VPIN9=5V, VPIN14=0V,RL=45Ω

VPIN9=0V, VPIN14=5V,RL=45Ω

VCTL=3.5~4.5V,VPIN9=5V

VPIN14=0V, RL=45ΩVCTL=3.5~4.5V,VPIN9=0V

VPIN14=5V, RL=45ΩIL=100~400mA,VPIN9=5V, VPIN14=0VIL=100~400mA,VPIN9=0V, VPIN14=5VVPIN9=5V, VPIN14=5VVPIN9=0V, VPIN14=0V

7----24.7-50-20-15-400.250.252.5--54012.52.50.50.5-----40-40

ValuesMin.Typ.Max.

104----5.000----0.40.43.3-4.56.56023.13.11.01.0300300----1570.5--5.350801540-------3.78----3.83.81.51.57007004040

UnitmAmAVVVmVmVmVmVAAVVdBdBV/µsVVVVmVmVmVmV

Total Device

Regulator

BTL Driver(Except for Traymotor driver)

Quiescent circuit currentICCQMute-on currentIMUTEMute-on voltageVMONMute-off voltageVMOFFOutput voltageVREGLoad regulation∆VRL3Line regulation∆VCCInput offset voltageVIOOutput offset voltage 1VOO1Maximum sourceISOURCE1

current 1

Maximum sink current 1ISINK1Maximum outputVOM1

voltage 1

Maximum output

VOM2

voltage 2

Closed-loop voltage

AVF

gain

Ripple rejection ratioRRSlew rateOutput voltage 1Output voltage 2

SRVO1VO2VOCTL1VOCTL2∆VRL1∆VRL2VOO2VOO3Output voltageregulation 1(CTL)

Tray Motor DriverOutput voltage(Unless otherwise

specified, VCTL=opened)regulation 2

(CTL)

Load regulation 1Load regulation 2Output offset voltage 2Output offset voltage 3

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw4

AT5659 Preliminary Product Information 5-Ch Motor Driver for CD/VCD Player Application Information1. Mute

MUTEHigh(>2.0V)Low(<0.5V)OpenMute circuitTurn-OFFTurn-ONTurn-ON

•

2. Thermal Shutdown

• The VREF BG is the output voltage of the band-gap-referenced biasing circuit and acts as the input

voltage of the TSD circuit. The base-emitter voltage of the TR, Q11 is designed to turn-on at belowvoltage.

VBE = VREF BG × R12 / (R11+R12) = 460mV

• When the chip temperature rises up to 175°C, then the turn-on voltage of the Q11 would drop downto 460mV.(Hysteresis: 25℃), the Q11 would turn on so the output circuit will be muted.

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw5

AT5659 Preliminary ProductInformation

5-CH MOTOR DRIVER IC 3. Regulator

VOUT = VREF BG × 2 = 2.5 × 2 = 5V (R2 = R3)

4. BTL Driver(Except for Tray Motor Driver)

Gain(dB)≈20×log(2×

R2)R1

• The voltage, VREF, is the reference voltage given by the bias voltage of the pin 23. It can be reducedthe total gain of BTL drive part, use additional series resistor into the input pin (pin3,10,19,25). It canalso increase or decrease the voltage gain of the CH1,CH4 using adjustable pin (pin4,24) by insertingan external series resistor.

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw6

AT5659 Preliminary ProductInformation

5-CH MOTOR DRIVER IC Input

VO+

VSIN>VBINVSIN=VBINVSINHighVPLow

OuputVO-LowVPHigh

StatusForwardBreakReverse

1

*VP=VCC1

2

5. Tray Driver

Input

DI5.1HighHighLowLowDI5.2HighLowHighLowOUT5.1VPHighLowVPOuputOUT5.2VPLowHighVPStatusBreakForwardReverseBreak1

*VP=VCC1

2

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw7

AT5659 Preliminary ProductInformation

5-CH MOTOR DRIVER IC Tray Motor Speed Control:

The amplitude of the output voltage is controlled by VCTL(pin20). Normally, the differential outputvoltage is VP when the VCTL is open. If you want to control differential output voltage of the tray,insert external resistor R and zener diode D1 as shown in figure 1. Zener diode D1 is only needed whenyou want to obtain a precision output voltage. In other case you only insert an external resistor R.

5. If the bias pin (23pin) drops below 1.4V, the output current is muted. Makesure that under normal operating conditions, this pin is at 1.6V or above.6. If the power supply voltage drops below 4.5V typ., the drivers are turned OFF.When the voltage exceeds 4.7V typ., the drivers return to their previous state.

Typical Application Circuit

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw8

AT5659 Preliminary ProductInformation

5-CH MOTOR DRIVER IC VCD Player Motor Driver Circuit

Package Outlines (units:mm): HSOP-28

2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw9

AT5659 Preliminary ProductInformation

5-CH MOTOR DRIVER IC 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-563-0878 WWW: http://www.aimtron.com.twFax: 886-3-563-0879 Email: service@aimtron.com.tw10