FPGA可编程逻辑器件芯片XCKU040-2FFVA1156I中文规格书

DS2 (v1.19) September 22, 2020

Product Specification

Summary

The Xilinx® Kintex® UltraScale™ FPGAs are available in -3, -2, -1, and -1L speed grades, with -3 having the highest performance. The -1L devices can operate at either of two VCCINT voltages, 0.95V and 0.90V and are screened for lower maximum static power. When operated at VCCINT = 0.95V, the speed specification of a -1L device is the same as the -1 speed grade. When operated at VCCINT = 0.90V, the -1L performance and static and dynamic power is reduced.

DC and AC characteristics are specified in commercial, extended, industrial, and military temperature ranges. Except the operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed grade industrial device are the same as for a -1 speed grade commercial device). However, only selected speed grades and/or devices are available in each temperature range.

All supply voltage and junction temperature specifications are representative of worst-case conditions. The parameters included are common to popular designs and typical applications.

This data sheet, part of an overall set of documentation on the UltraScale architecture-based devices, is available on the Xilinx.

DC Characteristics

Table 1:Absolute Maximum Ratings(1)

SymbolFPGA Logic

VCCINTVCCINT_IO(2)VCCAUXVCCBRAMVCCO

VCCAUX_IO(3)VREF

Internal supply voltage

Internal supply voltage for the I/O banksAuxiliary supply voltage

Supply voltage for the block RAM memoriesOutput drivers supply voltage for HR I/O banksOutput drivers supply voltage for HP I/O banksAuxiliary supply voltage for the I/O banksInput reference voltage

I/O input voltage for HR I/O banks

VIN(4)(5)(6)

I/O input voltage for HP I/O banks

I/O input voltage (when VCCO = 3.3V) for VREF and differential I/O standards except S_33(7)

–0.500–0.500–0.500–0.500–0.500–0.500–0.500–0.500–0.400–0.550–0.400

1.1001.1002.0001.1003.4002.0002.0002.000VCCO+0.550VCCO+0.550

2.625

VVVVVVVVVVV

DescriptionMinMaxUnits

DS2 (v1.19) September 22, 2020Product Specification

KintexUltraScale FPGAs Data Sheet: DC and AC Switching Characteristics

Production Silicon and Software Status

In some cases, a particular family member (and speed grade) is released to production before a speed specification is released with the correct label (Advance, Preliminary, Production). Any labeling discrepancies are corrected in subsequent speed specification releases.

Table22 lists the production released KintexUltraScale FPGAs, speed grade, and the minimum

corresponding supported speed specification version and Vivado software revisions. The Vivado software and speed specifications listed are the minimum releases required for production. All subsequent releases of software and speed specifications are valid.

Table 22:KintexUltraScale FPGAs Production Software and Speed Specification Release(1)

Speed Grade, Temperature Ranges, and VCCINT Operating Voltages

Device

XCKU025(2)

1.0V-3E

N/A

Vivado Tools 2015.2.1 v1.23 for FBVA676 and FFVA1156 packages

0.95V

-2E, -2I

-1C, -1I

-1M

N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A

0.90V

-1LI

N/A

-1LI(3)

N/A

Vivado Tools 2015.3 v1.23Vivado Tools 2015.1 v1.23 for FBVA676 and FFVA1156 packages

Vivado Tools 2015.3 v1.23

XCKU035(2)

Vivado Tools 2015.3 v1.23 for FBVA900Vivado Tools 2015.4 v1.23 for SFVA784

Vivado Tools 2015.2.1 v1.23 for FBVA676 and FFVA1156 packages

Vivado Tools 2015.1 v1.23 for FBVA676 and FFVA1156 packages

Vivado Tools 2015.4 v1.23 for

SFVA784

Vivado Tools 2015.3 v1.23

XCKU040(2)

Vivado Tools 2015.3 v1.23 for FBVA900Vivado Tools 2015.4 v1.23 for SFVA784

Vivado Tools 2015.4 v1.23 for

SFVA784Vivado Tools 2015.3 v1.23

N/AN/AN/AN/A

Vivado Tools 2015.4 v1.23

N/AN/AN/AN/AN/A

XCKU060(2)XCKU085(2)XCKU095XCKU115(2)XQKU040XQKU060XQKU095XQKU115Notes:

1.2.3.

Vivado Tools 2015.4 v1.23Vivado Tools 2015.4 v1.24

N/A

Vivado Tools 2015.4 v1.24

N/AN/AN/AN/A

Vivado Tools 2015.2 v1.23Vivado Tools 2015.3 v1.24Vivado Tools 2015.3 v1.24Vivado Tools 2015.2.1 v1.24

Vivado Tools 2016.4 v1.23Vivado Tools 2016.4 v1.23Vivado Tools 2016.4 v1.24Vivado Tools 2016.4 v1.24

Vivado Tools 2016.1 v1.24Vivado Tools 2016.1 v1.24

N/AN/A

For designs developed using Vivado tools prior to 2016.4, see the design advisory answer record AR68169: Design

Advisory for Kintex UltraScale FPGAs and Virtex UltraScale FPGAs—New minimum production speed specification version(Speed File) required for all designs.

Designs with these devices that use the dedicated System Monitor I2C (I2C_SCL and I2C_SDA) or PCIe reset (PERSTN0or PERSTN1) I/O where the bank 65 VCCO=3.3V must use Vivado Design Suite 2015.4 or later.The lowest power -1L devices, where VCCINT=0.90V, are listed in the Vivado Design Suite as -1LV.

DS2 (v1.19) September 22, 2020Product Specification

KintexUltraScale FPGAs Data Sheet: DC and AC Switching Characteristics

Speed Grade and VCCINT Operating Voltages

Description

I/O Bank Type

HPHRHPHRHPHR

300300150150300300

1.0V-3Min

Max

160012508006251600(3)1250

0.95V-2Min

300300150150300300

0.90V

-1/-1L

-1LMin

300300150150300300

Units

Max

160012508006251600(3)1250

Min

300300150150300300

Max

140012507006251400(3)1250

Max

140012507006251400(3)1250

Mb/sMb/sMb/sMb/sMb/sMb/s

LVDS TX DDR (TX_BITSLICE 4:1, 8:1)LVDS TX SDR (TX_BITSLICE 2:1, 4:1)LVDS RX DDR (RX_BITSLICE 1:4, 1:8)(2)

DS2 (v1.19) September 22, 2020Product Specification

KintexUltraScale FPGAs Data Sheet: DC and AC Switching Characteristics

Speed Grade and VCCINT Operating Voltages

Description

I/O Bank Type

HPHR

150150

1.0V-3Min

Max

800625

0.95V-2Min

150150

0.90V

-1/-1L

-1LMin

150150

Units

Max

800625

Min

150150

Max

700625

Max

700625

Mb/sMb/s

LVDS RX SDR (RX_BITSLICE 1:2, 1:4)(2)

DS2 (v1.19) September 22, 2020Product Specification

KintexUltraScale FPGAs Data Sheet: DC and AC Switching Characteristics

Table 26:Maximum Physical Interface (PHY) Rate for Memory Interfaces by I/O and Package

Speed Grade, Temperature Ranges, and VCCINT Operating Voltages

Package

DRAM Type

1.0VMemory Standard

I/O Bank 0.95V

0.90V

Units

Type

-3E

-2E

-2I

-1C/I-1LI

-1M-1LI

QDR II+(6)AllAllSingle rank component633600600550550QDRIV-XP

HP

All

Single rank component

800

800

800

667

667(7)

DS2 (v1.19) September 22, 2020Product Specification